Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM(909) 360-4010
P&J Rancho Cucamonga Concrete & MasonryP&J Rancho Cucamonga Concrete & Masonry

Masonry Contractor in Glendora, CA - Brick, Block and Stone for Foothill Homes

P&J Rancho Cucamonga Concrete & Masonry is a masonry contractor working in Glendora, CA. We repoint worn brick, repair chimneys, build block and retaining walls, and lay pavers and stone for homes from the flats to the foothills.

An outdoor masonry kitchen has a tiled counter, stainless-steel appliances, and a large stone oven beside a stone wall.
A covered outdoor kitchen and dining patio features stone-clad columns and counters, a grill, and a built-in fire pit.

Glendora as we see it on the job

Glendora runs from flatter, established neighborhoods up into streets that climb toward the foothills of the Angeles National Forest, and the masonry changes as you go. Lower down, we mostly see brick that needs repointing, chimneys that have had a long run, and garden walls that have started to lean. Up the hill, the calls are more about yards that need leveling and the walls that hold them. It's much the same mix we work on in Upland and Pomona, just with more slope.

That slope shapes most of what we plan here. A wall on a sloped lot has more to hold back, so it needs a deeper footing and a way for water to get out from behind it, and getting block and stone up a steep driveway takes more planning than a flat lot does.

Masonry work we do in Glendora

Permits, licenses and pricing for Glendora jobs

Building permits in Glendora go through the city's Building & Safety Division, which also handles the inspections, so when your job needs a permit, its review and inspection dates set the start and the pace. Before you hire anyone, check that they hold a City of Glendora business license, because the city requires every business working inside city limits to have one and pay its business license tax before starting. We're licensed and insured, and before we start we check what the city asks for on your kind of job, then handle the application and line up the inspections when a permit is needed.

The price here mostly comes down to size and ground: how long and tall the wall is, how much old work comes out first, what material you choose, and how hard it is to get a crew and a load of block to the spot. The schedule turns on permit timing when there is one, material delivery and how much tear-out comes first. Hillside yards are familiar ground for us, since we build the same kind of walls out in Highland. I come out, look at the job myself and give you the estimate, so your number comes from your yard and not a guess.

  • If your home may be a designated historic property, we'll ask you to confirm that with the city's planning office before we plan any work.
  • On a sloped lot, we'll ask where water goes now, because a wall that traps water behind it is the one that starts leaning later.
  • Steep driveways and narrow side yards change how we get block and stone in, so we look at access on the estimate visit.
  • Tearing out an old wall adds hauling to the job, so we price the tear-out and haul-off at the estimate along with the new work.
  • Planning a fireplace, chimney or outdoor kitchen on a foothill property? Find out your fire hazard zone first, which the questions below cover.

Get a free on-site estimate for your Glendora masonry job

Tell us about the wall, chimney or brick you're looking at, through the form or at (909) 360-4010, and we'll reply within one business day to set a time. I come out to your property myself, look at it with you and give you the estimate, free and with no obligation.

(909) 360-4010

Glendora masonry questions we hear

How do I apply for a building permit in Glendora?

You apply online through the city's Civic Access portal, since the city no longer takes building permit applications by email. You'll need an account to start, and the portal is where plans get uploaded, review status gets tracked and inspections get scheduled. When your masonry job needs a permit, we handle that application and the inspections for you.

How do I find out if my Glendora home is in a fire hazard severity zone?

Check your address with the city, which has a Fire Hazard Severity Zone map adopted by the City Council. A city update from March 2025, before the map was adopted, counted 5,149 acres as very high, 578 as high and 555 as moderate. Let us know your zone when we come out, since it's worth having in hand before you plan a fireplace, chimney or outdoor kitchen.

Do you recycle the old block and concrete when you tear out a wall in Glendora?

On projects the city covers, yes, because state law requires that 65% of construction and demolition debris be recycled or reused, and those projects have to submit a waste management plan. Old block, brick and concrete usually sort out easily for recycling, so we plan the tear-out and haul-off with that in mind. If your job is covered, the plan goes in with the permit paperwork we handle.

Service areas

We're based in Rancho Cucamonga and work across the cities around it. The ones listed here have their own pages, but they aren't the only places we go, so if your city isn't on the list, ask us.

Ask about your Glendora masonry project

We pick up evenings and weekends too, so call (909) 360-4010 or send a note through our form whenever you've got a minute to look at that wall.

If you've got a question about your brick, block or stone, ask it, and I'll explain what's going on before anyone talks price.

Tell us about your project
(909) 360-4010Get an estimate